Welcome to Fancheng Machinery Parts; E-mail: dale3402@163.com
Facebook Twitter Youtube Instagram Linkedin Whatsapp

Fancheng Machinery Parts.

Contact Us: +86 13026592153

Fancheng Machinery Parts.

Send your inquiry: dale3402@163.com

Small Excavators
How to Deal With Small Excavators Under High Temperature Conditions?
2023-05-08
Hydraulic Pump of a Small Excavator
What Should Be Done When The Hydraulic Pump of a Small Excavator is Severely Worn?
2023-05-10

How to Extend the Life of Excavator Bucket Teeth?

With the continuous use of excavators. Excavator bucket teeth wear and tear will be increasing. Naturally, its service life will be greatly shortened. So what measures should we take to extend the service life of excavator bucket tooth?

How to Extend the Life of Excavator Bucket Teeth?
  • the use of excavator bucket teeth should first be the right choice, and for the material to determine the need to be carried out according to the environment, the only way to be able to better ensure that the choice of the right, and the correct choice of bucket teeth in use Also can play the best performance.
  • Daily Inspection
    In the daily maintenance of excavator, take 2 minutes to check the bucket every day. The bucket body is the degree of wear and whether there are cracks. If the degree of wear is serious, reinforcement should be considered. As for the cracks in the bucket body, timely repair welding should be carried out to avoid increasing the length of the cracks due to delayed maintenance, resulting in the situation that maintenance is impossible. In addition, kick the digging bucket teeth with your feet to check whether the bucket ruler is stable. If the bucket teeth are loose, they should be tightened immediately.
  • Timely Replacement
    the wear of the tooth seat on the bucket teeth of the excavator life is also very important, tooth wear off 10%-15% after the proposed replacement of the tooth, because the wear and tear of the teeth and the big There is a large gap between the teeth, so that the teeth and teeth with the seat, and the force point has changed, the bucket teeth due to changes in the force and fracture.
  1. Pay attention to the operating angle
    The driver of the excavator should pay attention to the working angle when digging. When digging, try to make the bucket teeth perpendicular to the working surface for excavation, or the angle of inclination does not exceed 120 degrees to avoid excessive bucket teeth. But also be careful not to have a large resistance when swinging the arm left and right, which will cause the teeth to break due to excessive force on the left and right.
  2. Do not swing the boom of the excavator left and right when the resistance is large. Too much force on the left and right may easily break the bucket teeth and the bottom of the bucket teeth. The left and right sides are not designed in consideration of the force.
  3. During the use of excavator bucket teeth, the outermost bucket teeth wear 30% faster than the innermost wear parts. After a while, the inside and outside of the teeth can be interchanged.
  4. It is recommended to replace the dedendum when the dedendum wears 10%. There is a large gap between the worn tooth root and the tooth.

If you want to know more information about our company’s bucket teeth, welcome to contact us.